Refer to the image to determine which panel, Panel One is. The Chase is available with four panels no cutouts for cabinets. Or, various cabinet cutout combinations can be specified. The following rules apply: Only one panel can be cut out for a lower cabinet. You cannot place a table on the panel with a lower cabinet cutout. One upper cabinet cutout can be in any panel. If two upper cabinet cutouts are preferred, they must be on opposing panels. Upper cabinets can be surface-mounted on any panel in any combination; no cabinet cutouts are required.

Specify a Location Code for all four panels of the chase; Panel One, position 4, Panel Two, position 5, Panel Three, position 6 and Panel Four, position 7. ^ Upper cabinets may be located on one or both opposing panels.

^^ Lower cabinet located only on one panel. Important: These customer order requirements, in addition to other customer order requirements, must be satisfied prior to the beginning of manufacturing lead time.

†Specify 4-digit Color code.