Drawer Unit:
Suspension Rails: formed angles; vertical flanges are fully heli-arc welded to chassis Frame Members; welds are buffed to a smooth, bright polished finish

Housing: Top: one piece with back and both sides flanged down; front is flanged down and formed to create a recessed horizontal drawer jamb

Back and Sides: one piece wrapper; bottom edge is hemmed; top and bottom edges are flanged in; back and sides are formed with 90 degree bends; the front flanges of the sides are formed to create a vertical recessed drawer jamb; wrapper is inserted into the Top with back, sides, and front flanges spot-welded to Top's flanges

Spreader: formed channel; heli-arc welded to Sides' bottom flanges (welds are concealed)
Slide Mounting Panel: formed channel punched to accommodate housing slide members; heli-arc welded to Sides' top and bottom flanges (welds are concealed)

Drawer: Body: one-piece punched and formed creating the drawer's inner front, back, sides, and bottom with radius formed bottom bends and coved corners; front, back, and both sides' top edges are flanged out; front, back and sides are spot welded

Outer Front Panel: one piece punched with top edge formed into a channel; bottom edge and side edges are formed into channels with flanges; Outer Front Panel's top edge channel overlaps Drawer's inner front panel top edge with bottom and side flanges spot welded to the Drawer Body's bottom and sides

Pull: fastened to Drawer Front with machine screws

Slide Members, Housing/Drawer: riveted to Housing's Slide Mounting Panel and Drawer's sides
General: Drawer Unit is inserted into Suspension Rails and heli-arc welded; welds are polished to a uniform finish