![](/assets/departments/Research_Page_050.jpg)
|
This Wall-Mounted Support System with Stainless Steel Troughs for Keyhole Suspended Primate Cages, is designed to hang the maximum number of cages on a given length and height wall.
The system is fabricated from electro-galvanized roll-formed channels and trough brackets, with troughs made of stainless steel. Channels are vertically mounted to the wall at both ends and between each cage.
Attached to these channels are two horizontal channels per tier of cages. The horizontal channels are fitted with interlocking studs that hold each cage to the system through the keyhole punched slots in the cage backs. Brackets attached to the vertical mounted channels support the stainless steel troughs.
Each trough's ends and back is formed-up above the bottoms of the suspended cages. In addition, the trough's front edge is formed-up to create a lip. The troughs are custom made to direct waste into a downspout at the center, right end, or left end depending on the drain location in the room.
For additional information on sizing and rack dimensions, please contact Suburban Surgical. These units are built in custom sizes. The dimensions are as built per on-site measurements.
AVAILABLE OPTIONS:
- Stainless Steel Watering System
- CPVC Watering System
|