This Stainless Steel One-Piece Two-Tier Four-Unit Imperial Dog Cage Unit is available with four different top, side, and back combinations. Each combination features a one-piece die-formed wrapper, consisting of sides and back.
Type (1) has a solid top and 1" diameter observation/ventilation holes punched in the upper portion of the back and one side.
Type (2) has 1" diameter observation/ventilation holes punched in the top and upper portion of the back and one side.
Type (3) has a solid top and wire grill for the upper portion of the back and one side.
Type (4) has a wire grill top and upper portion of the back and one side.
All grills are glass beaded to a satin finish. The side of the unit can accommodate a watering system.The frame is fabricated from die-formed angles and channels. All joints are welded for strength. Each of the removable electropolished doors has a rod-frame and features vertical and horizontal rods in the upper portion, and a deflector panel with two removable 1.50 quart bowls in the lower portion. Each door has a 5" wide by 3" high cardholder and a two-point self-locking latch.
Eight (8) and nine (9) square foot cages have full-width doors; 12.1 square foot cages have wire grill sections next to the doors.The removable plastisol coated expanded metal floor in each cage is supported on top of the deflector, directing waste into various types of collection pans.
The unit's tilt pan acts as a metabolism pan or a flush-through pan depending upon the direction it is tilted. The frame has a glass beaded satin finish, removing any discoloration. The unit is equipped with chrome plated swivel casters with 5" polyolefin wheels, two with wheel brakes. Swivel and axle bearings have seals and zerk grease fittings.
AVAILABLE OPTIONS:
|
