Stainless Steel Wire Suspended Pigeon Cages features wire-constructed upper sides, back, and top with a solid one-piece lower wrapper, consisting of sides and back.  All wire portions of the cage body have a glass beaded satin finish.The back of the cage can accommodate a watering system.The cage is supported by full-length suspension runners. These runners have lanced dimples to secure the cage to the rack.

Stainless Steel Self-Framed Suspended Pigeon Cages features a #1x14 gauge welded wire mesh top and bottom. The top wire mesh and bottom wire mesh is welded to the hemmed flanges on the top and bottom edges of the side and back of the cage wrapper. The flange along each side's top edge form full-length cage suspension runners. The front of the cage has a #1x14 gauge wire mesh door welded to an 8 gauge frame.

Stainless Steel Poultry Brooder Cages features a one piece wrapper consisting of solid sides and back. Each cage is heated by an enclosed heater mounted under one section of the two-piece solid removable lid. This heater is controlled by an adjustable thermostat with a pilot light indicating when the heater is on. Three removable wire grills are supplied with each cage; one across the front and one on each side. The removable floor with a #2 X 16 gauge mesh animal resting surface, has a rod-frame with 2 cross members that rest on full length runners welded to the cage sides.