The front flanges of the Top and Wrapper are fully heli-arc welded for added strength; welds are ground smooth and polished to a uniform finish.

Sides and back are one piece wrapper with the front flanges formed to create a vertical recessed door jamb. This helps eliminate environmental contamination to the interior of the case cart.

Removable double-panel construction doors are smooth on both sides and have sloped top edges for water run-off and bottom weep holes for drainage.

Door knob is self-latching to keep the door(s) latched in the closed position during holding or transit or latched against the cart's side(s) in the open position for loading or cleaning.

Latch striker plate is adjustable to insure tight-closing doors and insure smooth latching of door.

Four 5" dia. Poly-Loc-Poly wheels, plate-mounted swivel casters, copper/nickel plated (two with swivel locks). Swivel and Axle bearings have grease fittings and seals. (Other casters are available.)

One piece Bottom is inserted into the Wrapper and spot-welded, creating a smooth edge-free cart interior that is pitched towards the door opening with drain holes in the front corners to insure water run-off while washing. The front edge of the bottom is offset creating a recessed door jamb and stop.

Top is one piece which is flanged down to overlap the wrapper's sides and back. This creates a crevice-free, smooth working surface. The Top is strengthened with braces spot-welded to the underside.

Door jamb is designed to have an overlapping surface behind the top, bottom, and sides of doors.