Request Quote


SSCI: Suburban Surgical Co., Inc.
Designer & Manufacturere of Stainless Steel Health Care Equipment: Hospital Products


Home
Who We Are
Customer Service
SSCI Policies
Convention Info
Veterinary Catalog
Testimonials
Contact Us


Sign Up for An Account Today!
SSCI Locations

Our Location
275 Twelfth Street
Wheeling, IL 60090
USA

847.537.9320
800.323.7366
FAX: 847.537.9061

Hours:
Monday - Friday CST
8:30 am - 5:00 pm


YouTube  

Home » Cabinetry » Full Height » Finishing Components

USE OF FILLER STRIPS

Filler Strips are used when cabinet's ends abut to walls. Filler Strips are fitted to fill the space and scribed to compensate for wall's plumbness by the installer. They create clearance to prevent drawers, when being pulled out, from rubbing against the wall. Filler Strips are 'L'-shaped and both the face and the side are laminated with high-pressure laminate. Laminating both exposed surfaces of the 'L' shape allows for aligning the face of the Filler Strip flush with the face of the cabinet's doors and drawers to create a custom installation. Select the same laminate/color as chosen for the cabinets.

USE OF INSIDE 90° CORNERS

Inside Corners are used when cabinet's are installed on two walls that are 90° to each other and no corner cabinet is used. The Inside Corner is used to create clearance to prevent drawers, when being pulled out, and doors, when opening, from rubbing against the cabinet front installed at 90°. Inside 90° Corners are 'W'-shaped and both faces and both sides are laminated with high-pressure laminate. Laminating the faces and sides of 'W' shape allows for aligning the faces of the Inside 90° Corners flush with the faces of the cabinet's doors and drawers to create a custom installation. Select the same laminate/color as chosen for the cabinets.

USE OF CORNER FOR T-MOUNTING TREATMENT/PREP-PROCEDURE TABLES

Inside Corners are used when tables are abutted to floor-standing cabinets at a 90° angle. The Inside Corner is used to create clearance to prevent drawers, when being pulled out, and doors, when opening, from rubbing against the cabinet front installed at 90°. Inside 90° Corners are 'W'-shaped and both faces and both sides are laminated with high-pressure laminate. Laminating the faces and sides of 'W' shape allows for aligning the faces of the Inside 90° Corners flush with the faces of the cabinet's doors and drawers to create a custom installation. Select the same laminate/color as chosen for the cabinets.

USE OF END PANELS

End Panels are used on the exposed ends of a cabinet to give the cabinet a finished appearance. End Panels are flat panels, both sides and the front edge are laminated with high-pressure lami-nate. Laminating both sides allows for aligning the edge of the End Panel flush with the face of the cabinet's doors and drawers to create a custom installation. Select the same laminate/color as chosen for the cabinets.

USE OF TOE KICK

Toe Kicks are used to finish the recessed toe space at the bottom of the cabinets, to give the cabinet installation a finished appearance. Toe Kicks are a strip, one side is laminated with high-pressure laminate. Select the same laminate/color as chosen for the cabinets.

USE OF BACK PANELS

Back Panels are used on the exposed backs of a cabinet to give the cabinet a finished appearance. Back Panels are flat panels, one side and the top edge are laminated with high-pressure laminate. Select the same laminate/color as chosen for the cabinets.



Products